Engineering Plastics Solutions

Plastics extrusion is a high-volume manufacturing process in which raw plastic (pellets, granules, flakes or powders) is melted and formed into a continuous profile (rod or plate). Our extrusion machines are unequalled in output or automation. We also run courses for engineering plastics production using these machines.

Moped:

Rod and tube Technical Data Ø 5-22mm

Production possibilities:

8 strands Ø 56710

4 strands Ø 12 13 15 16 18 20 22

Rod length: 0.5 to 3.1m

Dimensions of the plant: W0.6 x L5 x H1.3 m

Mini:

Rod and tube Technical Data Ø 20-50mm

Production possibilities: 4 strands Ø 25 28 30 32 35 38 40 45

Rod length: 0.5 to 3.1m

Dimensions of the plant: W0.7 x L5.3 x H16
Midi:

Rod and tube Technical Data Ø 20-50mm  

Production possibilities:   4 strands Ø 25 28 30 32 35 38 40 45

Rod length: 0.5 to 3.1m  

Dimensions of the plant: W0.7 x L5.3 x H16 m 

Rod and tube Technical Data Ø 50-130mm  

Rod length: 0.5 to 3.1m

Dimensions of the plant: W1.3 x L7.4 x H1.9 m  

Mega:

Rod and tube Technical Data Ø 160-300mm  

Production possibilities: 

1 strand Ø 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300

Rod length: 0.5 to 3.1m  

Dimensions of the plant: W1.2 x L7.2 x H1.9 m   

Plate:

Sheet and plate Technical Data Ø 600-1000 or 1200mm width

Production possibilities: plate thickness variable from 8-120mm  

Plate width: 650, 1050, 1250mm

Plate length: 0.5 to 3.1m

Dimensions of the plant: W1.3/1.7/1.9 x L7.4 x H1.9m

Annealing Press:

Capacity: max 5000kg  

Plate size: max W1050 x L3100mm  

Thickness: from 8-100mm  

Force: from 0-500 KN adjustable  

Dimensions: W2.4 x L4.8 x H4.3 m  

14 compartments Aluminium panels with intergrated channels.  

Programmable heating and cooling curves from 20-200ºC.  

Included automatic loading and unloading system

We developed our own more flexible shuttle roto-moulding machine. The shuttle can be built in a single, double or triple configuration. Best of all, the arms can be built to fit YOUR oven.

The arms are direct drive, making them easy to maintain and long lasting. The gearing allows you to rotate the arm and plate at different speeds and in alternate directions up to 10RPM. Plate and Arm can be rotated on their own.

The standard oven is 4m x 4m x 3m, (w x l x h), and can be gas or electric powered. The oven is of double skinned galvanised steel construction with 100mm thick “rockwool” insulation filling. The majority of the oven roof are comprises of special panel work which is specifically designed to harmlessly disintegrate and vent off to atmosphere should an explosion occur within the oven. The air is fully re-circulated every 15 seconds in the oven. Depending on the size of the oven, the doors can be automated or manual.

The units are built to CE standard. They come as standard with comparatively simple controls, but should you require PLC programmable controls, these can be built to your specification.